This video from sears partsdirect shows what to do when your gas grill won't light, starting with some easy troubleshooting like checking your propane tank level and your starter battery. Disconnect the gas line from the tank.
Raise the grill lid and then push in and turn one of the burner control knobs to the ignite position.
How to start a gas grill that won't light. Weber gas grill won't light? Open the lid of your grill and find the lighting hole on the side of the grill. Once you see that, place a match in the curled end of the holder.
Often, the battery is left in the spark generator for. If you cannot hear or smell gas, check the tank and confirm that you have fuel, or contact the natural gas utility to determine if there is a service interruption. If you can light the weber gas grill with a match you may have an ignition switch problem.
Second, turn off all burners on the grill. If the grill doesn’t light using the match, check for low or no gas flow. To see if your burners are getting gas, you can light them manually.
Depending on the type of ignition your grill uses, moisture can prevent it from sparking — and preventing your grill from starting. After it is lit then open the other burners. If it lights, the problem is likely the igniter.
If the grill still doesn’t light after the. If that doesn’t work, our more advanced troubleshooting takes you through resetting the pressure regulator, cleaning the grill’s burner ports and removing the burner tubes to clean. Slowly turn on the gas at the tank.
Clean the burner and test the igniter again. If the manifold fails, burners won't heat sufficiently or won't light at all. Make sure all the burner control knobs are turned off.
Use promo code youtube to save 10% on searspartsdirect.com.this video from sears partsdirect shows you what to do when your gas grill won't light. First, open the hood on your grill to ensure gas isn’t building up inside. The manifold on a gas grill has the burner control valves and the connecting gas tubing.
Find hundreds of grilling recipes: This seems to be the most common problem. Your problem could be as simple as a low gas tank.
Manually light the grill with a match. If the individual valve isn't available as a separate replacement part, replace the entire manifold. What could be the reason?
Turn the gas supply valve on. “if lighting the grill with a match, clip the match into the supplied lighting rod. If your burners still don’t light, it could be a problem with the gas flow or the ignition.
My weber gas grill won't light. See instructions on the control panel of your grill and in your manual. If this is the case, manually light just one burner using a match, and leave the grill on with the lid closed for 5 minutes.
Turn off the gas at the propane tank. Or it could be worse: Your grill should now heat normally.
Put the match in the match stick holder and strike the match to. If a valve is stuck and not working, replace the valve. On your propane tank, twist the propane tank shutoff valve clockwise until it is totally closed.
This is true of battery igniters. Then turn on the burner you want to light. The electrode should point toward the gas port opening of a burner with a distance of ⅛ to ¼ inch.
If the igniter does not click, it is not aligned correctly with the gray rocker switch. If you can detect gas, continue troubleshooting. If it doesn’t, a new igniter will probably do the trick.
The grill will happily light from there. To do it, get a long match or lighter. Turn on the gas burner.
Turn all control valves to high (including the side burner if you have one). In damp weather, it can be difficult for your grill to light. Reconnect the gas line to the tank.
This will warm everything up and dry it all out. If the grill lights, there’s no need to replace the igniter. Check that the grill burner is engaged with the control panel, and make sure your valves are positioned inside the burner tubes.
If it doesn’t light, the issue may actually be a clogged or dirty burner. If your grill won't light, it could be because you're lighting the wrong burner. Is it making a clicking noise?
Turn all control valves to off. Start with the easiest thing first: Make sure to double check every burner is off.
Check to make sure they are off by pushing the control knobs in and turning them clockwise until they stop.